Do you want to know how to use drill machine? Then you are at the right place. Drilling machines are the most powerful and convenient tools to help you do all your tasks efficiently, including DIY projects. Not using it properly can result in injury.
If you want to get the best results out of this tool, you must know how to use it safely. If you are a beginner or have just started using a drilling machine or a professional, there are specific safety measurements you should follow. Besides, if you want to buy a drill machine @ best price, you can click on the button below & grab one.
In this article, we’ll discuss everything you need to know about how to use drill machine safely. Continue reading below to get a fair idea about how to use drill machine.
Table of Contents
How To Use Drill Machine?
Now that you know all the safety measures, make sure you follow them. After taking the necessary steps, you can start drilling. But, before that, you should have complete knowledge of using the drill correctly and safely.
Whether you are a professional or just a beginner, you need to follow a few steps to ensure safe drilling. Let’s take a look at what those important steps are:
Step 1: Drill the Pilot Holes
It is always advisable to start with a pilot hole before getting into the actual process. Drilling a smaller hole will help you get the hang of the process and guarantee a better result for the last. Therefore, always start with a pilot hole and then move to a larger hole to reduce the chances of slipping or damage.
For brittle surfaces like glass or ceramic, you need to be extra careful. There is a high probability of damage to the material in case of negligence. To avoid this, make tray markings or make a small “X” on the surface where you want to pierce with masking tape. Now, place the drill bit on top of the “X” and tap it gently with the hammer to make a small dent there.
Step 2: Keep the Pressure Steady
The next important step in the drilling process is to apply steady pressure to the drill. You should not apply more or less pressure to the object, but only as needed. It must be stable and perfect so that the drill bit can easily and slowly push the object into the surface.
If you think you are applying even the slightest force, you may be using the wrong drill bit.
Step 3: Adjust the Clutch
Adjusting the torque of the machine accordingly is another important step when using a drill machine. You can do this using the drill’s bendable collar. This collar has a series of numbers written on it indicating torque.
The highest number represents the maximum torque. You can adjust the torque by setting the numbers appropriately. Let’s say you are having difficulty penetrating the material. You can increase the torque by regulating the number. If you feel that the force is too high that the bit can drill deeper into the material, reduce the torque.
Step 4: Let It Cool
Any time you’re drilling through hard or very hard materials or when you’re drilling at high speeds, serious friction can occur in the machine. This can cause the bit to overheat. Sometimes, it can be so extreme that the bit can turn red and even burn the material you are drilling. To avoid this, it is advisable to start at a low speed and then gradually increase the speed as needed. You can also do this. Keep the slow tempo steady and then pause for a few seconds in between. This will allow the drill bit to cool down.
Let’s say you are drilling on glass, ceramic or stone. In such cases, ensure a constant supply of water to keep the drill bit cool. Although it does not seem hot, let it cool down for some time. After that, you can start using it again.
Step 5: Don’t Force a Jam Bit
Let’s say the drill bit is stuck in the material. Do not try to force the machine to remove it. Instead, turn off the drill, unplug it, and then try to detach the bit and chuck. After separation, you can easily remove the bit from the stuck surface using a manual tool.
Conclusion
I hope this ultimate guide on how to use drill machine will equip you with all the information you need. If you are a professional or a beginner, make sure you follow all the security measures mentioned in this article. This ensures your safety and safe use of the machine.
